Other

Yuba's Bamboo Boards give your traveling companion the perfect place to rest their feet for maximum comfort. They attach to the rear rack of Yuba's Mundo cargo bikes and they're manufactured from 5-ply bamboo that matches Yuba's Bamboo deck. They also provide better support for some cargo loads.

Think of it as home base for your stuff. Carry just about anything life throws at you with this sturdy, durable 3-ply Bamboo Base Board for the front cargo rack on the Supermarché. Use Yuba Straps to properly secure your load. - 3-ply Bamboo - Hardware included - 2-Year Warranty - For Supermarché Only! - We choose to use 3-ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.

Give your passengers a comfy resting place for their feet or support your cargo load with a pair of stylish Bamboo Sideboards on your Kombi Cargo Bike. We choose to use bamboo for our Running Boards because it’s an extremely durable material that will stand up to your lifestyle. It’s also a very sustainable material that grows quickly and requires very little water or other resources to reach maturity. - Only compatible with the Kombi - Easy installation - 5-ply Bamboo

The perfect perch for your little riders inside the Bamboo Box. Complete with two 3-point harnesses, soft back and bottom cushions and sturdy 3-ply bamboo boards, your kiddos will be safe and comfy on the ride. Easy to install and durable enough to stand up to your kids. - 3-ply Bamboo - Hardware included - Harness and cushions included - Compatible with Bamboo Box only - 2-Year Warranty - For Supermarché Only! - Bamboo Base Board and Bamboo Box required for installation. - We choose to use 3-Ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Wheels Manufacturing, Zip Ties, Jar of 600, Black

- Designed to fit most lightweight, midweight, and cruiser bicycles - Fits frames with welded-on mounting plates - Made in the U.S.A.

Encourage kids to dream big, express themselves, and create their own world with reflective, removable stickers so they can customize their helmet with the passions that make them unique. - Reflective for extra visibility while riding. - Removable to seamlessly switch up and customize their gear. - Thousand Jr. pack comes with every Thousand Jr. helmet. Other packs are sold separately. - Each sticker sheet comes with a themed coloring card. - Sticker sheets are approximately 6.5 x 8.5 inches. - Approximately 16 stickers on Thousand Jr. sheet, 17 on Jr. Activist sheet, 50 on Super Shapes sheet, and 90 on Lots of Letters sheet.

• Self locking rear mount design • Fully adjustable length for 26" to 29" wheels • Alloy construction

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

Turbo Chainstay-Mounted Kickstand - 323mm.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks - Durable, weatherproof 3M adhesive - 2-piece pack is designed to fit most cranks

The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 55mm wide x 269mm long - 14 mils thick polyurethane for durability - UV Resistant

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized

Replacement part